Power and Canister Filter Replacement Parts

The Cascade 1500 Impeller replaces the impeller for the Cascade 1500 canister filter. Replacing an old impeller is essential to keep your filter running powerfully and efficiently.

• Magnetic impeller assembly replacement
• Fits Cascade 1500 canister filter
• Includes impeller, shaft and magnet

Old impellers can result in decreased water flow, poor circulation, and, in some cases, even an unpleasant grinding noise. Replace the impeller to reinvigorate your filter with strong, silent water pull and maximum circulation.

Note: For the Cascade 1500 canister filter only. Cascade 1000 and 1200 models each require different impellers.

The Aquatop Replacement Barrelhead O-Ring for CF400-UV provides a tight fit and a secure seal for your Aquatop CF400-UV Canister Filter. Maintain a complete seal is essential for efficient operation and leak prevention.

• Replacement O-ring for Aquatop CF400-UV Canister Filter
• Maintains seal and prevents leaks
• Genuine Aquatop replacement part

The Aquatop Replacement Barrelhead O-Ring for CF500-UV provides a tight fit and a secure seal for your Aquatop CF500-UV Canister Filter. Maintain a complete seal is essential for efficient operation and leak prevention.

• Replacement O-ring for Aquatop CF500-UV Canister Filter
• Maintains seal and prevents leaks
• Genuine Aquatop replacement part

This Aquatop Replacement Impeller Assembly fits CF400-UV Canister Filters. The replacement assembly comes complete with impeller shaft, rubber grommets, fan blade, and magnet.

• Replacement impeller for Aquatop CF400-UV Canister Filter
• Includes shaft, rubber grommets, fan blade and magnet
• Genuine Aquatop replacement part

This Aquatop Replacement Quick Disconnect Valve fits the CF400-UV Canister Filter. O-rings are included for secure seals. This is a genuine Aquatop factory replacement part.

• Replacement quick disconnect valve for Aquatop CF400-UV Canister Filter
• O-rings included
• Genuine Aquatop replacement part

API Rena Filstar XP kink free tubing is a high quality non kink silicone tubing which is 5 feet long and 0.75" diameter. This tubing is factory tubing that will replace tubing in your Rena XP1, XP2, XP3 or XP4.

• Factory replacement kink-free tubing
• Includes two 5' long replacement tubes
• Filstar XP Tubing is 3/4" diameter

This Aquatop Replacement Quartz Sleeve Cover fits the CF500-UV Canister Filter. The quartz sleeve is a protective glass tube cover for the UV bulb.

• Replacement quartz sleeve for CF500-UV Filter
• Glass cover for UV bulb
• Genuine Aquatop factory replacement part

These Aquatop Replacement Media Trays fit CF400-UV Canister Filters. Each pack contains all three trays for complete filtration. Note that media trays do not include filter pads or media.

• Replacement media trays for Aquatop CF400-UV Canister Filter
• Filter pads and media sold separately
• Genuine Aquatop replacement part

Tray Dimensions: 8"L x 8"W x 2-7/8"H

This Aquatop Replacement Media Tray fits CF500-UV Canister Filters. Each pack contains one tray. Note that media trays do not include filter pads or media.

• Replacement media tray for Aquatop CF500-UV Canister Filter
• Filter pads and media sold separately
• Genuine Aquatop replacement part

Tray Dimensions: 9"L x 9"W x 2.5"H

The Cascade 1000 Impeller replaces the impeller for the Cascade 1000 canister filter. Replacing an old impeller is essential to keep your filter running powerfully and efficiently.

• Magnetic impeller assembly replacement
• Fits Cascade 1000 canister filter
• Includes impeller, shaft and magnet

Old impellers can result in decreased water flow, poor circulation, and, in some cases, even an unpleasant grinding noise. Replace the impeller to reinvigorate your filter with strong, silent water pull and maximum circulation.

Note: For the Cascade 1000 canister filter only. Cascade 1200 and 1500 models each require different impellers.

Cascade 1000 Canister Filter Motor Unit replacement part. Penn Plax Cascade 1000 Canister filter Motor Unit DOES match their manufacturer sku of CCF214.

• Replacement Cascade 1000 Canister Filter Motor Unit
• Cascade 1000 Replacement Motor only
• Does not include impeller - sold separately

NOTE: The impeller, and impeller housing are NOT INCLUDED! Make sure you put the impeller and impeller housing into the new motor when it arrives so that the motor can pump water into the filter. Or you may purchase them separately.

Cascade 700 and 1000 Motor Unit Gasket replaces old, worn out or cracked motor gaskets in the Cascade 700 (CCF2UL) and 1000 (CCF3UL) aquarium canister filters.

• Cascade canister filter motor unit gasket replacement
• Fits Cascade 700 (CCF2UL) and 1000 (CCF3UL) canister filters
• Prevents costly damage to filter motor

This gasket only works for the Cascade 700 and 1000 model filters. Other models will require different gaskets.

Replacement Impeller O-ring for Penn Plax Cascade Canister Filters. This O-ring maintains a quality seal and protects the impeller from leaks and water damage. Fits Cascade models 700 and 1000.

• Replacement Impeller O-ring for Penn Plax Canister Filters
• Fits models Cascade 700 and Cascade 1000
• Maintains an effective seal to prevent damage to impeller

API Pond and Waterfall Cleaner uses the power of active oxygen to deep-clean pond surfaces, waterfalls, fountains, and birdbaths on contact. It is safe for all fish and aquatic plants and should be used as needed to maintain a clean, clear pond or outdoor water feature.

• Cleans pond surfaces
• Deep cleans waterfalls and decorative rocks
• Keeps fountain and birdbaths clean
• Safe for fish and aquatic plants

INSTRUCTIONS: For ponds: keep pumps and aeration operating during application. Surface debris will turn white when treatment is complete. Remove with a net. If accidently applied to plant leaves, wash off immediately. Add 2 tsp. for every 100 gallons of water, sprinkling evenly around the pond. Wait 24 hours, before repeating treatment. For waterfalls and fountains: turn off water pump. Powder must come in contact with wet debris to be effective. Wait 15 minutes before turning the pump on again. Repeat as needed. For birdbaths: sprinkle directly into the birdbath water. Wait 15 minutes, then rinse and refill the birdbath.

The Cascade 1200 Impeller replaces the impeller for the Cascade 1200 canister filter. Replacing an old impeller is essential to keep your filter running powerfully and efficiently.

• Magnetic impeller assembly replacement
• Fits Cascade 1200 canister filter
• Includes impeller, shaft and magnet

Old impellers can result in decreased water flow, poor circulation, and, in some cases, even an unpleasant grinding noise. Replace the impeller to reinvigorate your filter with strong, silent water pull and maximum circulation.

Note: For the Cascade 1200 canister filter only. Cascade 1000 and 1500 models each require different impellers.

The Tetra Whisper Impeller Assembly replaces the impeller for the Whisper Power Filter PF60, 3, 4, Whisper Advanced PF30-60 and Triad 3000 filters. Replacing an old impeller is essential to keep your filter running powerfully and efficiently.

• Magnetic impeller assembly replacement
• Fits Whisper PF60, 3, 4, Whisper Advanced PF30-60 and Triad 3000 power filters
• Full impeller assembly

Old impellers can result in decreased water flow, poor circulation, and, in some cases, even an unpleasant grinding noise. Replace the impeller to reinvigorate your filter with strong, silent water pull and maximum circulation.

The Cascade 1200 and 1500 Motor Unit Gasket replaces old, worn out or cracked motor gaskets in the Cascade 1200 (CCF4UL) and 1500 (CCF5UL) aquarium canister filters.

• Cascade canister filter motor unit gasket replacement
• Fits Cascade 1200 (CCF4UL) and 1500 (CCF5UL) canister filters
• Prevents costly damage to filter motor

As gaskets get older, pressure and wear-and-tear cause them to lose their snugness. Replace misshapen gaskets to maintain a water-tight fit.

This gasket only works for the Cascade 1200 and 1500 model filters. Other models will require different gaskets.

This Fluval Edge Pre-Filter Sponge is specifically designed for your Fluval Edge Power Filter. Install on the filter the intake to collect fine debris, improving filter efficiency and keeping your aquarium cleaner. Also prevents small fish from becoming trapped by the filter suction.

• Pre-filter sponge for Edge Power Filter
• Traps small debris to keep filter efficient and aquarium cleaner
• Prevents small fish from being sucked into filter
• Easy to install on filter intake

Hagen Fluval Canister Filter Motor Seal Ring is a replacement part for Fluval 305, 306, 405 and 406 canister filters. Replacing the seal ring is important to maintain a proper seal and prevent possible damage to the motor.

• Replacement motor seal ring for Fluval aquarium filters
• Fits Fluval 305, 306, 405 and 406 canister filters
• Maintains proper seal, prevents leaking and damage

Replacement Impeller for the Lifegard Aquatics Quiet One Pro Model Pump

• The Ceramic Shaft is NOT included.
• This Impeller is the replacement for both the pond & aquarium Quiet One Pro Model Pumps
• This part is for the Quiet One Pro Series Pumps only. It will NOT work with any of the Quiet One Original Series Pumps

Replacement Impeller for the Lifegard Aquatics Quiet One Pro

• Will not work with any of the Quiet One Original Series Pumps.

Replacement impeller for Lifegard Aquatics Quiet One Pro

Old impellers can result in decreased water flow, poor circulation, and, in some cases, even an unpleasant grinding noise. Replace the impeller to reinvigorate your filter with strong, silent water pull and maximum circulation.

This genuine Marineland replacement sponge acts as an effective pre-filter for the Marineland Reverse Flow Power Head. The pre-filter traps large debris and other suspended objects before they can enter the power head, preventing clogging and potential damage.

• Genuine Marineland replacement part
• Pre-filter sponge replacement for Reverse Flow Power Head
• Prevents large debris from clogging and damaging power head

Dimensions: 6"L x 2.5"W

Marinelands C-Series O-Ring and Gasket kit contains all the replacement seals for the C-Series C-160 and C-220 Aquarium Canister Filters. Sound O-rings and gaskets are essential for maintaining proper seals and protecting your filter.

• Replacement O-ring and gasket kit for Marineland C-160 and C-220
• Contains all O-rings and gaskets
• Replace old parts to maintain proper seals and protect filter

This Marineland Impeller Assembly is a genuine factory replacement part for the Emperor 400 Power Filter. Pack includes the complete impeller assembly and cover.

• Replacement impeller for Emperor 400
• Includes impeller assembly and cover
• Genuine Marineland replacement part

This Marineland Replacement Bio-Wheel is for the Eclipse 2, Emperor 280B and 400B Filters. As the Bio-Wheel rotates, beneficial bacteria grow and thrive on its super dense surface. As water flows, the bacteria eliminate ammonia and nitrite on contact.

• Irregular rotation of the Bio-Wheel is also normal
• Discoloration of pleated Bio-Wheel material is normal and desirable
• A Bio-Wheel rotating at any speed is working to eliminate toxic ammonia and nitrite

Note: Marineland Bio-Wheel should not be replaced unless damaged.

Supreme Ovation 1000 replacement impeller assembly. Replacement part for the Supreme Ovation Power Jet Filters (Ovation-1000) (#01028).

• Supreme Ovation 1000 Impeller
• Official Danner Manufacturing Impeller Part
• Durable magnetic shaft and plastic fan blades

This genuine Tetra replacement part is the complete Impeller Assembly for the Whisper Power Filter. Use to maintain continual efficient operation for Tetra Whisper Power Filter models 40, 2, 20-40 and 2000.

• Genuine Tetra replacement part
• Whisper Power Filter Replacement Impeller
• For Whisper 40, 2, 20-40 and 2000 Power Filters

Use with T3 Energizer (sold separately). Approximately 2.5" long.